JVC SP-AT3-B Instruction Manual page 20

Problem
I cannot find
"SP-AT3-X" on my
Bluetooth® device.
Voice interrupted
in Bluetooth®
mode.
No Sound in
LINE IN mode.
The unit does not
respond when
pressing any
buttons.
20
Solution
• Ensure that the unit is switched on.
• Ensure that the Bluetooth® function is
activated on your Bluetooth® device.
• The unit has a Bluetooth® function that can
receive a signal up to 10 metres. Keep a
distance within 10 metres between the unit
and your Bluetooth® device.
• Ensure that the unit and Bluetooth® device is
connected within 10 metres.
• Ensure that no obstruction between the unit
and the Bluetooth® device.
• Ensure the audio cable is properly connected.
• The unit may freeze up during use. Switch the
unit off and then on again to reset the unit.
• Press the RESET button to restart the unit.