Receiving A Private Call In Tmo - Motorola MTM800 Feature User Manual

Dialing Scheme
Private ID is a number with up to 16 digits.
16-14
MCC
Two options are given to the user:
• Fixed - user may provide up to 16 digits which include the
MCC, MNC and ISSI numbers or if less than 16 digits are
entered, it will be filled with the digits that are set by the
service provider.
• Automatic - you need to provide up to 8 digits (if more it will
switch to fixed mode). If you will provide less then 8 digits,
radio fills the number with its own ISSI. The rest of the 16
digit number is automatically given by the radio.
If you select more then 16 digits the display will give you a
warning about incorrect input.
Recent Calls List
Select the number from the recent call list. See "Recent
Calls" on page 130.
One-touch Dial
See "Programmable Keys (0-9, * and #)" on page 17.
Calling a Number in a Message
See "Calling a Number in a Message" on page 149.

Receiving a Private Call in TMO

1. The MTM800 Enhanced switches to the incoming Private
Call. The display shows the caller's identity.
2. To answer an incoming half-duplex call, press PTT. To
answer an incoming full-duplex call (indicated by Spkr/
Erpc soft keys), press
13-9
MNC
.
8-1
ISSI
59