Motorola MTM800 Feature User Manual page 135

Editing Scan Lists
1. From the main menu, select More...
> Group Setup > Scan > Scan Lists.
2. Scroll to the required scan list. Press
View to see the groups used in the
scan list. Press Back to return to the
previous display.
3. To edit/view the contents of a scan list,
press the Menu button
4. In the List Optns sub-menu, scroll to
the required option and press Select.
The options below cannot be used for the Network List.
If the Network List is empty, it will not be displayed.
• Rename the active scan list. (For details on text editor
use, see "Writing Text" on page 157). Enter a new name
(alias) and press Ok. The display shows the new set-
ting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes. You will be prompted to remove all groups from the
selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press Ok to select a folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press Ok.
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
.
Scan Lists
Back
Scan List1
Scan List2
Scan List3
Scan List4
View
Scan List5
Scan List6
List Optns
Back
Rename
Capacity
Clear
Add Group
Select
Edit
127