Motorola MTM800 Feature User Manual page 131

Semi-Auto - Per default the backlights are switched off. You
can switch the backlights on by pressing the Dimmer button
. After a few seconds (configured by your Service
Provider) the backlights switch off automatically.
Auto - Per default the backlights are switched off. The
backlight switches on when any key is pressed, or another
activity - like incoming call - occurs. After a few seconds
(configured by your Service Provider) the backlight switches
off automatically.
Profile
1. Intensity
High
2. Intensity
Below High
3. Intensity
Above Low
4. Intensity
Low
5. Intensity Off
Note: The intensity level can be changed by your Service Provider.
To change your backlight settings:
1. From the main menu, select Setup > Display
2. Press Change.
3. Select required setting.
4. Press Done to exit.
Setting the Wallpaper
1. From the main menu, select Setup > Display
2. Press Change.
3. Select required setting (On/Off).
4. Press Done to exit.
Display Keypad
backlight backlight
100% on
75% on
50% on
25% on
0% on
Emergency
Status LED
button backlight
100% 100%
75% 100%
50% 100%
25% 50%
15% 50%
>
>
Backlight
.
Wallpaper
.
123