Pool Exact ® Ez Overview; Install "Aaa" Batteries - eXact Pool EZ Quick Start Manual

POOL EXACT
YOUR NEW POOL EXACT EZ PHOTOMETER IS IDEAL FOR
TESTING AND MAINTAINING YOUR POOL AND SPA WATER.
SAMPLE CELL - 4 ML
Built-in plastic 4mL cell
for collecting your water
sample
LCD DISPLAY
RESULT
LOW
UNITS
BATTERY
BASE
Install/replace batteries here
(IP67 rated waterproof)
Part no. 486201
INSTALL "AAA" BATTERIES (NOT INCLUDED)
1. Use a #4 Phillips head screwdriver to remove the screw
from the base of your Pool eXact
2. Remove the base.
3. Install Four (4) new AAA batteries as illustrated inside
your photometer's battery compartment. We recommend
using high quality batteries.
4. Replace the base fi rmly with pressure while tightening the
screw. The meter will turn on automatically.
5. Tighten the screw with #4 Phillips head screwdriver. Be
sure not to over tighten.
EZ OVERVIEW
®
CELL COVER
Covers the cell for
mixing and bright
light situations
EZ .
®
Sensafe.com
LIGHT SOURCE
Uses 525nm
wavelength and
11mm path-length
for testing
LCD DISPLAY
Displays results
and test name
READ BUTTON
Starts test timer
MENU BUTTON
Cycles through
available tests
ZERO/ON BUTTON
Turns the meter
on and creates a
baseline for your
water testing
Protected against the effects
of immersion in water to depth
between 15cm and 1m
SCREW
Unscrew to
remove base
3