eXact Pool EZ Quick Start Manual page 22

22
5
REMOVE STRIP
Remove one eXact
in a dry, convenient place. Replace cap on bottle
6
DIP STRIP AND PRESS READ
Press
simultaneously
pads in the sample then use a gentle, constant, back
and forth motion (2 strokes per second) until the timer
displays '1'. Remove and discard the strip.
7
READ RESULTS
READ
of three digits on the Pool eXact
should add a "0" to the end of the result on the LCD
(ex. 121 = 1210 ppm). This result is automatically stored
in the CHH menu. After testing is complete, rinse the
sample cell immediately with cleaning brush.
©2016, Industrial Test Systems, Inc. Printed in USA
FILL, DIP, READ
CHLORIDE (as NaCl)
®
to initiate a 20 second countdown and
DIP
result displayed as Chloride. Due to the limit
Strip Micro CH Chloride III and set
the eXact Strip by submerging all
®
EZ photometer, you
®