eXact Pool EZ Quick Start Manual page 20

20
1
PREPARE SAMPLE
Prepare sample for testing using Mini Dilution Kit
II #487202.
1. Rinse 50mL graduated conical tube with
2. Rinse the 3.0mL syringe with saltwater sample
3. Add the syringe content (2.0mL salt water
4. Now, fi ll the graduated conical tube to the 40mL
5. Mix content of graduated conical tube by turning
©2016, Industrial Test Systems, Inc. Printed in USA
CHLORIDE (Salt)
distilled or deionized (salt-free) water.
to be tested. Finally, fi ll the 3.0mL syringe to the
2.0mL line very precisely (plunger ring should
line up at the 2.0mL line and little or no air
bubble should be present).
sample) to a clean 50mL graduated conical
tube by pushing plunger all the way down to
expel sample.
line with distilled or deionized (salt-free) water.
Cap graduated conical tube.
up side down at least three times. 1:20 Dilution
Sample is ready for testing.