Printeron - Samsung ProXpress C401 series User Manual

PrinterOn

Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 25).
To register your printer on the PrinterOn service, you must activate the PrinterOn feature on the
machine through the SyncThru™ Web Service (see "Registering your printer on the PrinterOn
service" on page 155).
This is available only when PrinterOn is enabled. The sub menus that appear in this menu may
differ based on whether or not the machine is connected to the PrinterOn server.
Before you can use the PrinterOn feature, you must configure the network connection of
the machine. If you cannot connect to the machine after configuring its network connec-
tion, then you may have to check the external internet connection of the network.
When the PrinterOn feature is enabled, you can set it to Release Code mode or Auto mode.
These modes can be changed on the PrinterOn server.
• Release Code: Users must enter a Release Code to print a document sent through
• Auto: The machine automatically prints documents sent through PrinterOn without the
PrinterOn.
user entering a Release Code.
PrinterOn | 177