Adjusting Your Camera Settings - Minox DCM User Manual

Adjusting your camera settings

Open the Setup Menu
Press the ON/MODE button until the Setup Menu appears on the display.
Use the Up or Down button to select one of the following options:
Switch off
Select the option Switch Off and press the Select button (SEL/OK) to switch off the Camera
Module.
Formatting
It is possible to format your camera memory. In the Setup Menu select Format and press the Select
button. Select Yes in the Formatting Menu and press the Select button (SEL/OK) again. This deletes
all images and settings.
Set AutoOff time
Select AutoOff and press the Select button (SEL/OK). Select the time after which you would like
the camera to switch off automatically if left unattended.
Adjust frequency
You can manually adjust the frequency to reduce image flicker under tungsten light when in the
Video Mode. Select Frequency and press the Select button (SEL/OK).
Select between 50 Hz and 60 Hz and confirm your setting with the Select button.
Reset settings
If you want to reset the camera settings to the default settings select Settings and press the Select
button (SEL/OK). Select Default and press the Select button to reset the settings.
Language setting
You can set the language used in the menus. Select Language and press the Select button
(SEL/OK). Select the preferred language and confirm the setting with the Select button (SEL/OK).
7