Fastening The Safety Chain; Adjusting Your Camera Settings - Minox DSC Instruction Manual

Fastening the safety chain

Attach the safety chain to the
provided safety chain eye on
the DSC. It is not possible to
connect the safety chain when
the DSC is connected to the
external fl ash module.
Note: You must remove the safety chain before
connecting the external fl ash to the DSC.
44

Adjusting your camera settings

Adjusting the camera settings can only be carried
out with the fl ash module (DSC fl ash) connected.
The settings can only be carried out using the
monitor.
See section Connecting the fl ash module (DSC
safety chain eye
Flash) to the camera (DSC)
Opening the Setup menu
In Playback mode press the shutter release, the
Playback menu appears on the monitor. Use the
Up or Down button to change to the menu item
Setup and confi rm this selection by pressing the
shutter release again.
Up button
Down button