Selecting The Camera Settings; Camera Settings; Functions And Their Respective Explanations - Minox DD200 Instruction Manual

Selecting the camera settings

Camera settings

Switch on the DD200 using the Power On/Off button. Operate
the "Mode button" twice to access the setup mode.
Setup
Web-Cam
Format
Auto off
Buzzer
Frequency
Settings
Language
You can move around the menu selection using the /T but-
ton (up) and the /W-button (down). Select the desired Se-
tup function with the OK/Menu button. There now follows a
description of all functions.
8

Functions and their respective explanations

WebCam Change into the Webcam mode for
video conferences
Format Delete all images in the internal
memory or SD card:
- Yes
- No
Auto off Upon actuation of the "Auto-off-
function" in the Setup mode the
camera automatically switches back
to „Stand-by mode".
Optional modes available:
- 30 sec.
- 60 sec.
- 120 sec.
- Off
Buzzer Beep signal selection:
- On
- Off
Frequency Please set the camera to the mains vol-
tage used for artificial light in your
country. The wrong frequency setting
may lead to poor imaging quality or
flickering video recording.