Introduction
Congratulations on the purchase of your new MINOX DCM. Like all other MINOX products this
digital Camera Module boasts the traditional values fostered by MINOX. It combines functionality
in the smallest possible space with excellent optical quality.
Fast and easy operation make the MINOX DCM an excellent tool for digital observation and digital
photography in combination with a spotting scope.
The MINOX DCM is ready to become your permanent companion and capture wonderful
memories in the modern way.
These instructions are to help you benefit from the full performance spectrum of your MINOX
DCM.
Enjoy photography with your digital Camera Module!
Introducing your DCM
Please take a few moments to read these Instructions and the Safety and Maintenance notes in the
last section of this manual.
Inserting the battery
Your camera uses a lithium-ion rechargeable battery.
You can recharge the battery using the provided accessory equipment.
We do not warranty for battery or camera damage caused by using any other method to charge the
battery.
To insert the battery hold the Camera Module with your right hand, with the monitor shield flipped
open and the back facing upward. Now open the battery compartment cover by opening the latch
with the thumb of your left hand and moving it to the side.
Slide the battery into the battery compartment with the metal contacts head first and close the
battery latch. Close the battery compartment.
Your photos will remain safely stored in the camera memory or on the SD card even if the batteries
are removed or replaced.
Charging the battery
Connect the switched off Camera Module using the provided USB cable to the USB connection of
your computer. This starts the charging process automatically. While the battery is being charged
a green lamp lights up in the proximity of the USB connection.
Charging is completed when the lamp extinguishes.
2