Features Of This Unit - Luxman LX-380 Owner's Manual

Features of This Unit

Wooden case
A traditional square-shaped wooden case is used.
Beam tetrode connection /
push-pull output stage
Push-pull configuration with 6L6GC beam tetrode connec-
tion
Phono amplifier
This unit is equipped with a phono amplifier that is com-
patible with the MM/MC cartridge to achieve analog record
playback in a high-grade level without adding a dedicated
phono amplifier.
Tone control
A bass/treble type tone control function that enables fine
sound volume adjustment with a 3-step turnover frequency
selector switch is equipped.
LECUA-LUXMAN Electric Controlled
Ultimate Attenuator
An electrically controlled attenuator LECUA is mounted. It
attenuates the signal level by combined resistances.
By using an exclusive solid-state IC and controlling the at-
tenuator to the level equal to the angle of the volume knob
position, you can feel the similar touch of our traditional slid-
ing-type volume control.
2
Subsonic, monaural function
A subsonic switch that controls woofer shaking generated
by warp of the analog record, and a monaural switch to be
used during monaural playback are provided.
Headphone output terminal
This terminal allows you to casually enjoy music with head-
phones.
Separate function
This unit is equipped with a separate switch to separate the
pre-amplifier and power-amplifier each other that enables
the bi-amp connection adding a power-amplifier and the
coexistence with an AV system.
Selector switch IC
Selector switch IC with high sound quality, which is used in
the top-end control amplifier, C-900u, improves the sepa-
ration and crosstalk performances.