Access The Set Up Functions Of The System; System Menu - Sagem MorphoAccess 200E Installation Manual

Automatic fingerprint recognition terminal
Table of Contents

Advertisement

manuel.book Page 37 Vendredi, 30. mai 2003 12:21 12
E

Access the set up functions of the system

To access the System Menu, you must leave the main application
of the MorphoAccess™. You must access the Administrator Menus
(see the section Biometric Management in Standalone) if you are
in fingerprint detection mode.
You must select the System Menu.
Then, select the ASYST menu to enter in the system application.
Enter the password to access to SYSTEM MENU (default value:
12345).
You can use the correction key # to delete the last digit entered.
The password can be changed in the configuration file
"/cfg/system" (see the section Setting up Administrator System
Pin). The System Menu will appear when the password is correct.
SE32/03-011145-01
ASYSTE
MACCESS

SYSTEM MENU

Enter Password:
Press <#> for correction
OK
CANCEL
SAGEM SA document. Reproduction and disclosure forbidden.
S
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Morphoaccess 300e

Table of Contents