Wizard Setup; Access Point - D-Link DAP-1360 User Manual

Section 3 - Configuration
In AP mode, the DAP-1360 acts as a central connection point for any computer (client) that has an 802.11n or backward-compatible
802.11b/g wireless network adapter and is within range of the AP.
Enable Wireless:
Select this to turn Wi-Fi on and off. Use the drop-
down box to select if you want to use a schedule.
Click Add New to add or change a schedule.
Wireless Mode: Select the wireless mode from Access Point,
Wireless Client, Repeater, Bridge, Bridge
with AP mode, WISP Client Router and WISP
Repeater.
Wireless Network
The Wireless Network Name is a unique name
Name (also called
that identifies a network. All devices on a network
the SSID):
must share the same wireless network name
in order to communicate on the network. If you
decide to change the wireless network name
from the default setting, enter your new wireless
network name in this field.
Enable Auto Check the box to enable Auto Channel Scan.
Channel Scan: Enable this feature to auto-select the channel
for the best wireless performance.
Wireless Channel: Auto channel selection is the default setting. First
disable Auto Channel Scan (see below) and you
will be able to select a wireless channel.
802.11 Mode:
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down
menu options are 802.11g Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed 802.11b/g/n.
D-Link DAP-1360 User Manual
Wireless Setup

Access Point

39