D-Link DAP-1360 User Manual page 40

Section 3 - Configuration
Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the pull-down menu.
Transmission
Select the transmission rate. It is strongly suggested to use the Best setting for optimal performance.
Rate:
Enable Hidden
Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen
Wireless: by site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to
connect to it.
Wireless Security Select a wireless security setting. Options are None, WEP, WPA, WPA2, or WPA2-Auto. See p.53 of this manual for a
Mode:
detailed explanation of the wireless security options.
Wi-Fi Protected
Enable or disable the Wi-Fi protected setup feature.
Setup:
Lock Wireless
Locking the wireless security prevents the settings from being changed by any new external registar using its PIN. Devices
Security:
can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings
with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager Registar.
Current PIN:
Shows the current value of the access point's PIN.
Generate New PIN:
Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN to the user
interface of the registrar.
Reset PIN to
Restore the default PIN of the access point.
Default:
Reset to
Resets Wi-Fi Protected Status to Not Configured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status is
Unconfigured:
Not Configured.
D-Link DAP-1360 User Manual 40