Epson Stylus Color 880 Setup Manual page 15

4. To change the printer driver
settings, click Print on the File menu.
A Print dialog box similar to the one
on the right opens. (This example is
from Paint).
5. Select your printer in the Name list
box, then click Properties. The
printer driver opens
6. Click the Main tab, then select
Photo Quality Ink Jet Paper in the
Media Type list box.
7. Select Color as the Ink setting.
8. Select Automatic as the Mode setting.
When Automatic is selected, the
printer software optimizes other
settings according to the Media Type
and Ink settings that you make.
9. Click the Paper tab, then click
anywhere in the Paper Size list box and
select the paper size that is loaded in
the printer.
10. Click OK at the bottom of the printer
driver window. You return to the Print dialog box (or a similar dialog
box).
11. Click Close, Print, or OK to print. You may need to click a combination
of these buttons.
While printing is in progress, the EPSON Progress Meter (for Windows 98,
95, 2000, and NT 4.0) or the EPSON Despooler dialog box (for
Windows 3.1) is displayed, showing the printing progress and the status
of your printer.
For Macintosh users
Follow the steps below to print the sample file.
1. Make sure that A4 or Letter size paper is loaded in the printer.
2. Insert the printer software CD in the CD-ROM drive.
3. Open the EPSON folder and double-click the README file.