Epson Stylus Color 880 Setup Manual page 6

6. After turning on the printer, the Setup
utility opens automatically.
Follow the on-screen instructions to
install the ink cartridges, check the
print head nozzles, and clean the print
head. When a message appears
informing you that the setup is
complete, click OK.
Note:
If the Setup utility does not start, proceed to section
cartridge using the printer's control panel.
7. When a message appears informing you that the installation is
complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON USB
printer device driver is not installed correctly. See "Troubleshooting" in the
Daily Use guide for details.
After the setup is complete, proceed to section
Ensuring that the USB driver is installed correctly
After installing the software, USB users should follow the directions below
to confirm that the USB driver is installed correctly.
Note:
The illustrations used in this section show the procedure for Windows 98.
1. Click the Start button, point to Settings, and then click Printers. Make
sure that the icon for your printer is displayed in the Printers window.
2. Select the icon for your printer, then
click Properties on the File menu.
to install the ink
to print your first page.