Using Flash; Using Tone Services On A Pulse Line - Radio Shack RT-551 Owner's Manual

43-1051.fm Page 13 Tuesday, August 17, 1999 1:08 PM

USING FLASH

performs the electronic equiva-
FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
TALK
1 2
For example, if you have Call Waiting,
press FLASH to answer an incoming
call without disconnecting the current
call. Press again to return to the
FLASH
first call.
Note: If you do not have any special
phone services, pressing
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure
2. Press
3
3. When you hear the dial tone, dial
4. When you want to send tone sig-
might
FLASH
5. After you complete the call, return
T/P is set to P .
.
TALK
the service's main number.
nals, press . Any additional
numbers you dial are sent as tone
signals.
the handset to the base or press
. The phone automatically
TALK
resets to the pulse mode.
13