Adjusting The Handset's Volume; Using Redial; Using Flash - Radio Shack 43-3526 Owner's Manual

enter the correct number. To delete a
number, press
INTCM/DEL
When you receive a call,
appears. To answer the call, lift the
handset and press . If Auto Talk
TALK
is on, just lift the handset (see
"Turning Auto Talk On/Off" on
Page 13). If the handset is away from
the base, press any number key.
appears. To end a call, place the
handset on the base or press
ADJUSTING THE
HANDSET'S VOLUME
To adjust the handset's volume
   
during a call, press or
handset until you obtain the desired
volume level. A bar graph showing
current volume setting appears. Once
you set the volume level, the setting
is maintained even after you hang up
the phone provided as battery pack
has enough power. When battery
power becomes too low, the setting
returns to the original setting (two
bars).
   
When you press while the volume
   
is maximum or while the volume is
low, the setting does not change and
the phone beeps.

USING REDIAL

To quickly dial any of the last three
numbers dialed, lift the handset and
repeatedly press
REDIAL/PAUSE
the desired number appears , then
press .
TALK
16
Notes:
.
• The redial memory holds up to
?dYec_d] 9Wbb ?dYec_d] 9Wbb
?dYec_d] 9Wbb ?dYec_d] 9Wbb
30 digits, so you can redial long-
distance as well as local
numbers.
• The redial memory also holds
pause entries (see "Entering a
JWba JWba
JWba JWba
Pause" on Page 22).
• You can also press
.
END
PAUSE
dial the last number you dialed.
• The redial memory is
independent in each handset.
For example, you cannot redial
   
on the
the number dialed on handset A
using handset B.
• The redial memory is lost when
the battery pack power becomes
too low.

USING FLASH

performs the electronic
FLASH
equivalent of a switchhook operation
for special services, such as Call
Waiting. For example, if you have Call
Waiting, press
incoming call without disconnecting
the current call. Press
return to the first call. If you do not
have any special phone services,
pressing
current call.
until
Operation
REDIAL/
after pressing to
TALK
to answer an
FLASH
again to
FLASH
might disconnect the
FLASH