Operation; Making And Receiving Calls; Selecting The Channel; Adjusting The Handset's Volume - Radio Shack 4301122D Owner's Manual

43-1122.C.fm Page 12 Wednesday, December 13, 2000 1:56 PM
ˆ

Operation

The handset window has plastic film on it to
protect it during shipment. Carefully peel off
the film before using your phone.
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and press
. Talk and the current volume setting
TALK
appear on the handset's display, and the
CHARGE/IN USE indicator on the base
lights. Dial the number. The number appears
on the handset as you dial, then the call's
elapsed time appears. To end a call, place
the handset on the base or press
You can also dial the number before you
press . If you make a mistake, press
TALK
until the incorrect entry is erased,
DELETE
then enter the correct number. To delete the
entire number, hold down
When you receive a call,
appears. To answer the call, lift the handset
and press . If Auto Talk is on, just lift the
TALK
handset. If the handset is away from the
base, press any key. Talk
handset's display. To end a call, place the
handset on the base or press

SELECTING THE CHANNEL

The phone has 40 channels. If the call dis-
connects or you experience difficulty hearing
the conversation during a call, press
the handset to select a different channel.
Scanning appears as your phone search-
es for a clear channel.
ADJUSTING THE
HANDSET'S VOLUME
To adjust the volume of the sound you hear
through the handset during a call, press
12
or
sired volume level.
Volume High
Volume Low
play. Once you set the volume level, the set-
ting is maintained even after you hang up the
phone.
Note: When you press
is maximum or
the setting does not change. The phone
sounds three short beeps.

USING REDIAL

.
TALK
You can quickly dial the last number you di-
aled. Lift the handset and press
PAUSE
ber.
Notes:
.
DELETE
Incoming Call
appears on the
.
TALK

USING FLASH

on
CH
FLASH
a switchhook operation for special services,
such as Call Waiting. For example, if you
have Call Waiting, press
incoming call without disconnecting the cur-
rent call. Press
first call.
Note: If you do not have any special phone
8 8 8 8
services, pressing
the current call.
Operation
9 9 9 9
on the handset until you obtain the de-
Volume Maximum
, Volume Medium
appears on the handset dis-
8 8 8 8
9 9 9 9
while the volume is low,
, then . The phone dials the num-
TALK
• You can also press
REDIAL/PAUSE
pressing .
TALK
• The redial memory holds up to 32 digits,
so you can redial long-distance as well
as local numbers.
• The redial memory also holds pause
entries (see "Entering a Pause" on
Page 14).
performs the electronic equivalent of
FLASH
again to return to the
FLASH
FLASH
,
, or
while the volume
REDIAL/
after
to answer an
might disconnect