Ref. 2: Wheel Set; Before Each Use - NorthStar 53009 Owner's Manual

1. Attach the tank wheels to the tank frame using the tank wheel bolts and o-rings in mounting
structure.
2. The convex side of the wheel rims has to face inwards toward the air tank.

The convex side of wheel rim has to face inwards to the air tank otherwise the wheel will get stuck
when moving the compressor.

Failure to follow safety rules may result in serious injury or death to the operator or bystanders.

Inspect all hoses, fittings and couplings for leaks and wear. When leaks and wear are detected,
stop use immediately and replace those items before continuing use. Do not repair.

Never leave pressurized air in the air tank when performing maintenance.

Before starting the compressor, review the safety rules found above and throughout the manual.

Check to see that nuts and bolts are all snug. This must be done, as some fasteners may become
loose in transit.

Check that compressor is on a strong, stable level base.

Check that air filter is clean.

Do not place any materials on or against the compressor unit. Obstacle materials will limit the
cooling effect and could lead to premature failure.

Check the air compressor and piping systems for leakages and correct as required.
.

Ref. 2: Wheel Set

⚠WARNING

Before Each Use

⚠WARNING
Page 13 of 24