After Each Use - NorthStar 53009 Owner's Manual

vapors. This compressor can produce sparks which can ignite flammable liquids and vapors,
causing fire or explosion.

Abrasive tools such as grinders, drills and other tools are capable of making sparks that can ignite
flammable materials, liquids and vapors causing fire or explosion.

Always operate the compressor at a safe distance away from flammable items. Use in well-
ventilated areas.

Do not exceed the maximum rated pressure.
For Malfunction During Operation: Immediately turn off the compressor if any of the following
conditions arise during operation:
•
Excessive charge in motor speed, slow or fast
•
Overheating
•
Excessive vibration
•
Unusual noise
•
Flame or smoke
•
Air leakage
Pull ring on safety valve to immediately relieve pressure.

Drain air tank daily or after each use to prevent moisture buildup in the air tank.

Rust can weaken the air tank and cause leaks or bursting. If rust is detected, replace tank
immediately. Do not try to repair the air tank by welding, drilling or modifying it in any other way.
These modifications can weaken the air tank and cause a hazardous condition.

Do not leave an operating machine unattended. Always shut the machine OFF and release the
pressure before leaving the machine. NEVER disconnect the high-pressure outlet hose from the
unit while the tank and airline are pressurized. A hazardous high pressure air stream will result as
receiver tank is quickly emptied.
1. Move the pressure switch to the OFF position.
2. Turn regulator counter clockwise to close.
3. Operate tools briefly to release live pressure.
4. Disconnect all tools.
5. Drain air receiver tank by pulling safety relief valve.
6. After all storage air discharges, disconnect hoses.
7. Once the tank pressure gauge registers under 10 PSI, open the drain valve on the bottom of the
tank to drain condensation moisture. .
8. Store the air compressor in a clean and dry location.

After Each Use

⚠WARNING
Page 16 of 24