Initial Set-Up; Step 1. Inspect & Unpack; Step 2. Assembly - NorthStar 25654 Owner's Manual

Step 1. Inspect & Unpack
Upon receipt, inspect air compressor for missing or
damaged parts. Verify that it is the compressor you
ordered.
See "Component Identification" section of this manual
for a diagram of the compressor and its components.
For missing components, contact Product

Support at 1-800-270-0810.
For damaged components, contact the freight

company that delivered the unit and file a claim.
If complete, fill out product serial number

information. See "Limited Warranty" section of
this manual.
Grip Set (Includes)
Handle – Qty 1
Bolt – Qty 2
Model 25653 Only
Tank Wheel Bolt
Qty 2
Model 25653 & 25654
Nut
Qty 2
Model 25653 only
Figure 1

Initial Set-Up

Handle
Grip Set (Includes)
Handle – Qty 1
Bolt – Qty 2
Washer – Qty 2
Model 25654 Only
Tank Wheel
Qty 2
Model 25653 & 25654
Rubber Pad Set (Includes) 1. Insert the handle from the grip set into the mounting
Rubber Foot – Qty 2
Washer – Qty 2
Bolt – Qty 2
Model 25653 & 25654
2. Attach the tank wheels to the tank frame using the
3. Install the rubber pad sets onto the tank feet in the
7

Step 2. Assembly

Model 25653
Bolt
Tank
Wheel
Bolt
Wheel
Figure 2
Model 25654
Figure 3
structure. Secure using the bolts and washers
(if applicable) from the grip set.
tank wheel bolts.
orientation shown.
Tank