Grounding - NorthStar 53009 Owner's Manual


Do not use the compressor in the presence of gasoline, solvents, flammable liquids, or flammable
vapors. This compressor can produce sparks which can ignite flammable liquids and vapors,
causing fire or explosion.

Abrasive tools such as grinders, drills and other tools are capable of making sparks that can ignite
flammable materials, liquids and vapors causing fire or explosion.

Always operate the compressor at a safe distance away from flammable items. Use in well-
ventilated areas.

Do not exceed the maximum rated pressure.

This machine must be grounded while in use to protect the operator from electrical shock. This
drill press is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.

DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.

CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or if you are not sure the tool is properly grounded.
Grounded Tools: Tools with 3-Prong Plugs
Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. The plug
must be connected to a properly grounded outlet. If the tool should electrically malfunction or break
down, grounding provides a low resistance path to carry electricity away from the user, reducing the
risk of electric shock. (See Figure A.)
The grounding prong in the plug is connected through the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must be the only wire connected to the tool's grounding
system and must never be attached to an electrically live terminal.
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet should look like those in the following illustration.
⚠WARNING
EXPLOSION AND FIRE HAZARD

Grounding

⚠WARNING
Page 9 of 24