Mounting The Base Directly On A Wall - Radio Shack ET-553 Owner's Manual

43-1053.fm Page 9 Tuesday, August 17, 1999 1:26 PM
Mounting the Base
Directly on a Wall
For this mounting method, you need two
wood screws (not supplied) with heads
that fit into the keyhole slots on the bot-
tom of the base.
1. Drill two holes 3 15
inches apart. Then
thread a screw into
each hole, letting the
heads extend about
5 / inch from the wall.
16
2. Plug one end of the supplied modu-
lar cord into the
TEL LINE
back of the base.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
5
/
16
/
16
15
3
/
16
5
/
16
jack on the
jack on
DC IN 9V
4. Route the modular and adapter's
cords through the grooves on the
bottom of the base.
DC IN 9V
PU LSE - TON E TE L LI N E
5. Plug the adapter into a standard AC
outlet.
9