Paging; Memory Dialing; Storing A Number In Memory - Radio Shack ET-553 Owner's Manual

43-1053.fm Page 16 Tuesday, August 17, 1999 1:26 PM
5. After you complete the call, return
the handset to the cradle or press
. The phone
TALK
resets to the pulse mode.

PAGING

To page the person who has the handset
or to locate the handset when the phone
is not in use, hold down
base for at least 2 seconds. The handset
beeps for 1 minute.
For a brief page, press and release
on the base. The handset
PAGE/FIND
beeps five times. To stop it from beeping
sooner, press .
TALK

MEMORY DIALING

You can store up to 10 numbers in mem-
ory, then dial a stored number by press-
ing a one-digit memory location number.
Each number you store can be up to 16
digits long.
16

Storing a Number in Memory

automatically Note: An error tone sounds and the
phone exits the storing mode if you wait
more than 20 seconds between each key
press.
1. Lift the handset. If you hear a dial
tone, press
2. Press
indicator blinks.
on the
PAGE
3. Enter the number and any
and
Pause" on Page 17).
Note: Each
uses one digit of memory.
4. Press
location number (
sounds to indicate that the number
is stored.
Note: If you make an entry error,
such as entering more than 16 dig-
its, five quick beeps sound, the
TALK/BATT LOW indicator stops
flashing, and the number is not
stored. Start again from Step 2.
to turn it off.
TALK
. The TALK/BATT LOW
MEM
entries. (See "Entering a
PAUSE
or
TONE PAUSE
, then enter the memory
MEM
– ). A single tone
0 9
TONE
entry