Table of Contents
Advertisement
43-696a.fm Page 10 Friday, August 13, 1999 12:48 PM
7. Raise the base's antenna to a ver-
tical position and fully extend it.
Mounting the Base
Directly on the Wall
To mount the base directly on the wall,
you need two wood screws (not sup-
plied) with heads that fit into the key-
hole slots on the bottom of the base.
15
1. Drill two holes 3
Then thread a screw into each hole,
letting the heads extend about
inch from the wall.
"
15
3
/
16
10
/
inches apart.
16
5
/
16
"
5
/
16
"
5
/
16
2. If you have a single 2-line modular
jack close by, plug one end of the
supplied modular cord into the
jack.
TEL LINE 1/2
Note: When you make this con-
nection, you should not connect
another modular cord to the
jack or phone operation will
LINE 2
be erratic.
If you have two separate 1-line
modular jacks, plug one end of the
supplied modular cord into the
jack
TEL LINE
1/2
another modular cord (not sup-
plied) into the
TEL LINE 2
If you have only one 1-line modu-
lar jack, plug one end of the sup-
plied modular cord into the
jack to use line 1, or to
LINE 1/2
the
jack to use line 2.
TEL LINE 2
TEL
and
plug
jack.
TEL
Advertisement
Table of Contents
