Table of Contents
Advertisement
43-1050a.fm Page 9 Tuesday, August 17, 1999 12:56 PM
Mounting the Base
Directly on the Wall
For this mounting method, you need
two wood screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the base.
1. Drill two holes 3
15
inches apart. Then
thread a screw into
each hole, letting
the heads extend
about
5
/
inch from
16
the wall.
2. Plug one end of the supplied mod-
ular cord into the
the back of the base.
3. Insert the supplied AC adapter's
barrel plug into the
on the back of the base.
/
5
/
16
16
15
3
/
16
5
/
16
jack on
TEL LINE
jack
DC IN 9V
4. Route the supplied modular cord
and the adapter cord through both
the upper and lower grooves on
the bottom of the base.
Lower
Grooves
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
Upper
Grooves
9
Advertisement
Table of Contents
