Using Redial; Using Flash; Using Tone Services On A Pulse Line - Radio Shack ET-553 Owner's Manual

43-1053.fm Page 15 Tuesday, August 17, 1999 1:26 PM

USING REDIAL

lets you quickly dial the last num-
REDIAL
ber dialed. When you hear a dial tone,
simply press REDIAL .
Notes:
• The redial memory holds up to 32
digits, so you can redial long-dis-
tance as well as local numbers.
• The redial memory also holds pause
entries. (See "Entering a Pause" on
Page 17.)
• The redial memory does not store a
flash entry or any digits you press
after FLASH (see "Using Flash").

USING FLASH

performs the electronic equiva-
FLASH
lent of a switchhook operation for special
services, such as Call Waiting.
For example, if you have call waiting,
press FLASH to answer an incoming call
without disconnecting the current call.
Press again to return to the first
FLASH
call.
Note: If you do not have any special
phone services, pressing
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure
PULSE
.
PULSE
2. Lift the handset from the cradle or
press TALK .
3. Dial the service's main number.
4. When the service answers, press
. Any additional numbers you
TONE
dial are sent as tone signals.
FLASH might
is set to
TONE
15