2
APPLY RUBBER FEET TO ANTENNA UNIT
Lay the antenna unit on a soft, non-scratching surface, and apply the (3) rubber feet.
IMPORTANT!
If you are going to roof mount the antenna unit,
DO NOT apply the rubber feet.
See the roof installation section later in this manual.
3
SET UP TV AND RECEIVER
Set up your TV and receiver.
NOTE: For a list of compatible receivers, see kingconnect.com/dtv-receivers.
All components
sold separately.
You must configure the receiver as shown above. Once completed, the receiver will default to these settings
unless they are changed.
You must have a DIRECTV programming subscription.
Page 3