Lay the antenna unit on a soft, non-scratching surface, and apply the (3) rubber feet.
If you are going to roof mount the antenna unit,
DO NOT apply the rubber feet.
See the roof installation section later in this manual.
IMPORTANT! The KING Quest will not work with SWM only receivers.
For a list of compatible receivers, see www.kingconnect.com/dtv-receivers.
You must configure the receiver as shown above. Once completed, the receiver will default to these settings
unless they are changed.
You must have a DIRECTV programming subscription.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
2
APPLY RUBBER FEET TO ANTENNA UNIT
IMPORTANT!
3
SET UP TV AND RECEIVER
Set up your TV and receiver.
All components
sold separately.
Page 3