Mounting The Base Directly On The Wall - Radio Shack ET-536 Owner's Manual

43-1036.fm Page 8 Tuesday, August 17, 1999 9:52 AM
Mounting the Base
Directly on the Wall
For this mounting method, you need
two wood screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the base.
1. Drill two holes 3 15 /
16
inches apart. Then
thread a screw into
each hole, letting
the heads extend
about 5 / inch from
16
the wall.
2. Plug one end of the supplied mod-
ular cord into the
TEL LINE
the back of the base.
3. Insert the supplied AC adapter's
barrel plug into the
on the back of the base.
8
4. Route the modular and adapter's
5
/
1
Both
Grooves
15
3 /
16
5
/
1
jack on
5. Plug the adapter into a standard
jack
DC IN 9V
cords through both grooves on the
bottom of the base.
AC outlet. The POWER indicator
on the base lights.
Both
Grooves