Gigahertz Solutions NFA 30M Operating Manual page 19

What is the purpose of the individual files and where are they
saved?
There are very many small TXT-files on the SD-card?
© Gigahertz Solutions GmbH
"CONFIG.NFA" -> user configurations of the NFA-> SD-card
"NFAsoft.ini" -> Presettings for NFAsoft -> same folder as
"FIRMWARE.NFA" -> operating system of the NFA -> SD-card
Solution 1: You have activated the function "permanent log-
ging", which causes the meter to log not only when switched to
"Log". This option will cause a new file to be started each time
the meter is switched on, and each time you switch from one
Solution 2: There is a file system error on your SD-card. In this
case, save the "good" files and re-format your SD-card using
the original SD-formatter of the SD Association (to be found
https://www.sdcard.org/downloads/index.html).
- 17 -
Made in Germany
NFAsoft
mode to the other.
under the following link:
February 2016