Gigahertz Solutions NFA 30M Operating Manual page 14

Made in Germany
When clicking the „ok" button, the selected criteria and the set value will be trans-
ferred into the statistical values of the channel. When re-accessing the menu option
"Set edge criteria", the pre-set values will again be displayed (under construction).
Select HF-Unit
This function will only be displayed when selecting „CH 4"in the „Channels" window
and the data recorded in this channel are those of
an external input device such as an HF-Analyser
(and are therefore recorded in mV). Upon selection
of this point of the menu the following window will
open up for a selection of the HF-Analyser settings
during the recording period.
nT <> mG
This function allows to subsequently convert a chosen channel's data from milli-
Gauss to nanoTesla and vice versa.
Convert Units
This function can be used to display whichever values recorded via the AC/DC input
port directly in its original unit. This way, an HF-recording can be shown either in
µW/m² or V/m. A new channel will automatically be generated, thus avoiding any
potential loss of data.
Rename or Delete Channel
Allows for a renaming or deleting of the marked channel.
Summarise Channels
The plotted channels (selected on the left) will be added up ("square sum") and add-
ed as a new channel. The sum of 100/120 Hz, 150/180 Hz, R<2kHz and >2kHz are
considered to be the relevant parameter for the evaluation of "dirty electricity".
Extras
The first two items in the dropdown menu have been explained already.
Create KML-File
Required as a plugin for the connection of GPS-data, NFA logs and Google Earth
(currently in beta level ). Please ask for the current manual by e-mail.
- 12 -
February 2016 © Gigahertz Solutions GmbH