Alarm Setting Order; Max/Min Mode - Pantech WH2950 Operation Manuals

Note: when alert is triggered, the current triggering source icon for time,
icon for high
icon for low value will be flashing, indicating alert is triggered.
value and
Note: press ALARM key third time back to normal mode or press LIGHT /SNOOZE key back to
normal mode.
When a weather alarm condition has been triggered, the alarm will sound for 120 seconds and the
corresponding icon will flash until the weather condition is no longer present. Press any key to mute
the alarm.
You can also set a time of day alarm using the same method.

6.5.3 Alarm Setting Order:

1) Time alarm setting
2) Indoor high temperature setting
3) Indoor low temperature setting
4) Indoor high humidity setting
5) Indoor low humidity setting
6) Outdoor high temperature setting
7) Outdoor low temperature setting
8) Outdoor high humidity setting
9) Outdoor low humidity setting
10) High wind setting
11) High gust setting
12) Rain rate high setting
13) Rain day high setting
6.6

Max/min mode

6.6.1 Press and release MAX/MIN key to display MAX data
- Press TEMP. key to view wind chill, heat index and dew point max.
- Press RAIN key to view rain rate, rain day, rain week and rain month max.
- Press WIND/+ to view wind and gust max.
- Press PRESSURE/- to hold 2 seconds to view pressure absolute and relative max.
6.6.2 Press again to display min data
26