Pantech WH2950 Operation Manuals page 25

In alarm mode:
- Press RAIN key to shift display rain rate or day rain alarm data.
- Press WIND/+key to shift display wind or gust alarm data.
6.5.2 Alarm setting mode:
Hold the ALARM key for 2 seconds to enter alarm setting mode:
1. Time of Day Alarm. The hour will begin flashing. Press the WIND/+ or PRESSURE/-
key to change the hour value. Press the SET key to set the minute value. The minute
will begin flashing. Press the WIND/+ or PRESSURE/- key to increase or decrease the
minute value.
Press the ALARM key to turn the alarm on or off (if the alarm is enabled, the alarm icon
will be turned on).
2. Indoor Temperature High Alarm. Press the SET key to set the indoor temperature
high alarm. The indoor temperature will begin flashing. Press the WIND/+ or
PRESSURE/- key to change the indoor temperature alarm value.
Press the ALARM key to turn the alarm on or off (if the alarm is enabled, the alarm icon
will be turned on).
3. Indoor Temperature Low Alarm. Press the SET key to set the indoor temperature
low alarm. The indoor temperature will begin flashing. Press the WIND/+ or
PRESSURE/- key to change the indoor temperature alarm value.
Press the ALARM key to turn the alarm on or off (if the alarm is enabled, the alarm icon
will be turned on).
4. Indoor Humidity High Alarm.
5. Indoor Humidity Low Alarm.
6. Outdoor Temperature High Alarm.
7. Outdoor Temperature Low Alarm.
8. Outdoor Humidity High Alarm.
9. Outdoor Humidity Low Alarm
10. Wind High Alarm
11. Wing gust High Alarm
12. Rain rate high Alarm
13. Rain day high Alarm
14. Press the WIND/+ or PRESSURE/- to adjust alarm values.
15. Press the SET key to confirm & move to the next item.
16. Press the ALARM key to on/off the alarm
25