Dst(Daylight Saving Time); Time Zone - Pantech WH2950 Operation Manuals

SET Mm
SET NTH
SET
6.4.1 BEEP:
- Press the SET key for 2 seconds to select the beep section, ON/OFF section digits will start
flashing, press the WIND/+ or PRSSURE/- key to select ON or OFF.
6.4.2 MAX/MIN Daily:
- Press the SET key twice to select the MAX/MIN Daily section, ON/OFF section digits will start
flashing. Press the WIND/+ or PRSSURE
max/min daily at 12:00am).

6.4.3 DST(daylight saving time):

- Press the SET key third time to select the Daylight saving time section, ON/OFF section digits
will start flashing,press the WIND/+ or PRSSURE/- key to select ON or OFF . (default ON)
Note: DST time start at 1:00am GMT of the last Sunday in March and end at 1:00am GMT of the
last Sunday in October.

6.4.4 Time zone

- Press the SET key forth time to select the Time zone section, time zone section digits will start
flashing. Press the WIND/+ or PRSSURE/- key to select the value . (-12 to +12, default: 1)
Rainfall units of Measure Press WIND/+ to toggle between
Northern Hemisphere
(NTH) or southern
Hemisphere (STH) select
Exit Set Mode
Figure 14
/-
key to select ON or OFF . (Default ON. ON: Reset
mm and inch
Press WIND/+ to toggle between
Northern and southern
21
Hemisphere