Screen Display - Pantech WH2950 Operation Manuals

2. Insert 3 AAA batteries into the display console (optional).
Note: The batteries are intended for back-up power only. The backlight will remain on for 5
seconds when on back up battery power only. Only when you use power adapter it will the
back-light be continuously on.
3. Keep both sensor and the display console together for 15 minutes to lock in the sensor signals.
4. (Optional)-Spin the wind cups to simulate wind speed. Take the sensor to the sink and slowly drip
water into the rain bucket to simulate rain.
5. After 15miuntes, follow the mounting instructions for proper placement of sensors.
Note: Your display console should have readings in all sections. Wind and Rain will show 0's
(connected) until wind or rian occur or are simulated.
Note: If you only use battery to power up display console, you must press LIGHT/SNOOZE key
to light up the LCD before press any other key.
6. Display Console Operation

6.1. Screen Display

1.Time
2. Moon phase
3. Barometric Pressure
4. Weather forecast
10. Rain fall
11. Outdoor temperature
12. Outdoor humidity
13. RF icon
15