Install Batteries - Pantech WH2950 Operation Manuals

Reference Figure 5. Turn the mounting pole collar to lock the pole into place by rotating clockwise.
Figure 5

5.3.3 Install Batteries

Reference Figure 6. Locate the battery door on the bottom of the sensor array. Turn the set screw
counter clockwise to open the battery compartment. Insert the 3xAA rechargeable batteries (included).
The LED indicator on the bottom of the sensor array will turn on for four seconds and normally flash
once per 16 seconds (the transmission update period).
Close the battery door and tighten the set screw.
10