Storing Caller Id Records In A Memory Location; Dialing Numbers Froma Caller Id Record; Deleting Caller Id Records - Radio Shack ET-1110 Owner's Manual

43-1110.fm Page 26 Wednesday, August 18, 1999 8:22 AM
STORING CALLER ID
RECORDS IN A MEMORY
LOCATION
xx New CID Total
1. Press .
CALL ID
= xx
appears.
2. Repeatedly press
til you see the desired Caller ID
record.
3. Press .
MEM PROG
4. If you want to enter a name for the
displayed number, press
then enter the name.
5. Press , then enter the memory
MEM
location number.
beeps several times. The stored
memory location number and
appear.
OK
DIALING NUMBERS FROM
A CALLER ID RECORD
1. Press , then press
CALL ID
s or t until you see the phone num-
ber you want to dial.
2. Press The ET-1110 dials the
TALK.
displayed phone number.
If the phone number's area code
does not match the area code you
stored, the system automatically di-
als a 1 before dialing the displayed
area code and 7-digit phone num-
ber. (See "Setting the Area Code"
on Page 16.)
26
DELETING CALLER ID
RECORDS
The ET-1110 lets you delete individual
Caller ID records or all Caller ID records
at one time.
s or t un-
REVIEW
Follow these steps to delete a single
Caller ID record.
appears.
SETUP
The ET-1110
Save
Follow these steps to delete all Caller ID
records.
REVIEW
1. Press
CALL ID
press s or t until the Caller
REVIEW
ID record you want to delete
appears.
Clear ?
2. Press DELETE .
appear.
3. Press again.
DELETE
1. Press then press
CALL ID
and
Clear ? ALL
2. Press .
DELETE Clear OK
then repeatedly
and DEL
.
DELETE
appear.
DEL
appears.