Using Tone Services On A Pulse Line; Using Page - Radio Shack ET-1110 Owner's Manual

43-1110.fm Page 20 Wednesday, August 18, 1999 8:22 AM
Note: If you do not have any special
phone services, pressing
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure T/P is set to
2. Dial the service's main number.
3. When the service answers, press
. Q appears. Any additional num-
bers you dial are sent as tone sig-
nals.
4. After you complete the call, return
the handset to the base or press
The phone automatically re-
TALK.
sets to pulse dialing.
20

USING PAGE

might
FLASH
To page the person who has the handset
or to locate the handset when the phone
is not in use, press
The handset beeps three times and
Paging you
handset to beep for a longer time, hold
down
handset beeps for 3 minutes.
P .
To stop the handset from beeping before
it automatically stops, press
handset twice or
Note: You cannot page the handset dur-
ing a call.
on the base.
PAGE
appears. If you want the
for about 3 seconds. The
PAGE
TALK
on the base.
PAGE
on the