Transferring A Call Between The Handset And Base; Memory Dialing - Radio Shack ET-1118 Owner's Manual

To page the base from the handset,
press .
Paging Base
INTCM
and the base and handset ring. Press
or
SPEAKER INTERCOM
answer the page. Intercom
on the handset's display.
SPEAKER
To page the handset from the base,
press . The handset and
INTERCOM
base ring, and
Paging
handset's display. Press
on the handset to answer the page.
tercom appears.
To end an intercom call, press
the handset, press
SPEAKER
base, or hang up the handset.
If a call comes in during an intercom
conversation, either the person at the
base or the person at the handset can
answer the call. Press
handset or
SPEAKER
to end the intercom call, then press
or again to answer the
TALK SPEAKER
incoming call.
Note: The intercom does not operate if
the party being paged is already on a
call.
appears,
on the base to
appears
INTERCOM
appears on the
or
TALK INTCM
In-
on
TALK
on the
on the
TALK
on the base once
Transferring a Call between the
Handset and Base
You can use the ET-1118's intercom
feature to transfer a call between the
handset and the base.
To transfer a call from the handset to the
base, press . The call is put on
INTCM
hold, and
Paging Base
pear. When the person at the base an-
swers, press . The call is released
TALK
from hold and transferred to the base.
To return to handset use, press
again.
To transfer a call from the base to the
handset, press
INTERCOM
put on hold, and Paging
pear on the handset's display. When the
person with the handset answers, press
. The call is released from hold
SPEAKER
and transferred to the handset. To return
to base use, press
SPEAKER

MEMORY DIALING

You can store up to 20 numbers in
memory (10 each in the handset's and
base's memory), then dial a stored num-
ber by pressing a memory location num-
ber. You can also store a name with
each number in the handset's memory.
and ap-
Hold
TALK
. The call is
and Hold ap-
again.
17