Using Page/Intercom; Transferring A Call Between The Handset And The Base - Radio Shack ET-1123 Owner's Manual

43-1123.fm Page 15 Tuesday, September 5, 2000 11:13 AM
2. Dial the service's main number.
3. When the service answers, press
/ . Any additional numbers
TONE
you dial are sent as tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the phone as a two-way
pager and intercom between the base
and the handset. This is useful if the
handset is away from the base and you
want to locate it, or if you want to have a
conversation between someone with the
handset and someone at the base.
To page the base from the handset ,
press . The base and handset
INTCM
ring. Paging appears on the base's
display and Paging Base
the handset's display. Press
or on the base to answer the
INTERCOM
page. Both displays change to
.
com
To page the handset from the base ,
press . The handset and
INTERCOM
base ring.
Paging Handset
on the base's display and
pears on the handset's display. Press
or on the handset to an-
TALK INTCM
swer the page. Both displays change to
Intercom.
In either case, if the called party does
not answer within 1 minute, the paging
stops. Press or
INTCM
to restart paging.
To end an intercom call, press
the handset, press
base, or hang up the handset.
If a call comes in during an intercom
conversation, only the base rings, but
the person at the handset can also hear
the ring through the intercom. Either per-
son can answer the call by pressing
TALK
com call, then pressing
ER
Note: The intercom does not operate if
the party being paged is already on a
call.
TRANSFERRING A CALL
BETWEEN THE HANDSET
AND THE BASE
appears on
You can use the phone's intercom fea-
SPEAKER
ture to transfer a call between the hand-
set and the base for a three-way
Inter-
conversation.
To transfer a call from the handset to the
base, press
hold, CHARGE/IN USE blinks, and
appears
Hold
ap-
Paging
the handset's display. When the person
at the base answers, press
call is released from hold and trans-
ferred to the base. To bring the handset
back into the conversation for a three-
way conference, press
again
INTERCOM
SPEAKER
or once to end the inter-
SPEAKER
TALK
again to answer the call.
. The call is placed on
INTCM
and Paging Base
TALK
on
TALK
on the
or
SPEAK-
appear on
. The
TALK
again.
15