Table of Contents
Advertisement
At any time except during a call, press
or
to set the handset's ringer vol-
ume. The phone rings at the selected
volume and the display shows
Low
or
Ringer High
To set the base's ringer volume, set
on the back of the base to
RING VOL
,
, or
. When you set
OFF
LO
HI
to
, the base (and the handset if it is
OFF
on the base) does not ring but the other
phone connected to the same line rings.
If the handset is away from the base, the
handset also rings.
RING VOL
Note: When you set the auto talk func-
tion to off, the handset rings when you
lift the handset from the base. See "Us-
ing Auto Talk."
USING AUTO TALK
Your phone is preset so you must press
when you lift the handset from the
TALK
base to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base or by
12
pressing any key when the handset is
away from the base.
Ringer
Follow these steps to turn auto talk on or
.
off.
RING VOL
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the ET-1118 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset then hold down
. A menu appears with
CALL ID
selected.
Auto Talk
CALL ID
SELECT
2. Press
to change the auto
SELECT
talk setting.
On
indicating the selected setting.
3. To clear the display, press
or return the handset to the base.
1. Lift the handset then hold down
.
CALL ID
2. Press
or
to select
2
(Caller ID/Call Waiting).
or
Off
appears
CALL ID
CIDCW
Advertisement
Table of Contents
