Turning The Base Ringer On/Off; Setting The Handset'sringer Tone/Volume; Setting Auto Talk; Turning Caller Id/Call Waiting On/Off - Radio Shack ET-1123 Owner's Manual

900 mhz digital dual keypad cordless phone with speakerphone and caller id/call waiting
Table of Contents

Advertisement

43-1123.fm Page 10 Tuesday, September 5, 2000 11:13 AM
If the dial tone stops, you have
touch-tone service. Leave
set to
MODE P- -T
continues, you have pulse service.
Set
DIAL MODE P- -T
4. Press
to hang up.
SPEAKER
TURNING THE BASE
RINGER ON/OFF
To turn off the base's ringer , set
on the back of the base to
still make or receive calls using this
phone. Telephones on the same line
(and the phone's handset if it is away
from the base) still ring when there is an
incoming call.
To turn on the base's ringer , set
to
.
ON
SETTING THE HANDSET'S
RINGER TONE/VOLUME
You can select one of four different ring-
er tone/volume settings while the phone
is not in use. Press
handset to increase or decrease to the
ringer level setting. Repeatedly press
8 8 8 8
9 9 9 9
or
until you hear the desired ring-
er setting. Each time you press
9 9 9 9
, the ringer changes and the display
shows
Ringer A High
Low
,
Ringer B High
Low
.
8 8 8 8
Note: Pressing
when the display
shows
Ringer A High
display shows
Ringer B Low
10
DIAL
. If the dial tone
-T
to
.
P-
RINGER
. You can
OFF
RINGER
8 8 8 8
9 9 9 9
or
on the
8 8 8 8
or
,
Ringer A
, or
Ringer B
9 9 9 9
or
when the
does not
change the setting. Press the other but-
ton to change the setting.

SETTING AUTO TALK

Your phone is preset so you must press
to answer a call. With auto talk
TALK
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and hold down
until the Caller ID setup
CALL ID
menu appears with
selected.
2. Press
to change the auto
SELECT
talk setting.
On
or
cating the selected setting.
3. Press
or return the handset
CALL ID
to the base to store the new setting.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the phone to show
Caller ID information for an incoming call
even while you are already on the
phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
Auto Talk
Off
appears indi-

Advertisement

Table of Contents
loading

Table of Contents