ELECTRONIC COMPONENTS (CONT'D)
Electrical Conductor Plate
The Electrical Conductor Plate consists of a plastic
shell which houses six solenoids, all of the solenoid
terminals, 2 RPM sensors, the park/neutral contact,
transmission fluid temperature sensor, and a 13 pin
connector that estabishes the connection to the
vehicle harness and the TCM.
N2 Input
Speed Sensor
N3 Input
Speed Sensor
ATF Temperature
16
Technical Service Information
ELECTRICAL CONDUCTOR PLATE
Park/Neutral
Contact
Sensor
Press fit solenoid contacts. Ensure snug
fit solenoid terminals. If loose, close
down contact slots carefully.
AUTOMATIC TRANSMISSION SERVICE GROUP
Conductor tracks integerated into the plastic shell
connect all of the internal components to 13-way
connector.
With the exception of the six solenoids, all other
electronic components are integrated and part of the
electrical conductor plate (See Figure 15).
MERCEDES-BENZ
140 270 03 61
Figure 15
No. 5 not used
2
1
6
4
3
10
9
8
7
11
13
12
Conductor Plate Connector
(Face View)
Copyright © 2009 ATSG