Solenoid Locations And Identification - ATSG 722.6 Service Manual

ELECTRONIC COMPONENTS

Solenoid Locations And Identification

All models of the 722.6 transmission use a total of six
solenoids mounted on the electronic conductor plate
and the valve body, as shown in Figure 10. The
solenoids are located under 2 white plastic covers,
also show in Figure 10. Earlier valve bodies do not
have these covers. They were added to help protect
the electrical connections from shorts created by
metal particles that may be floating in the fluid.
1
1 Torque Converter Clutch Solenoid.
2 2-3 Shift Solenoid.
3 Modulated Pressure Control Solenoid.
12
Technical Service Information
SOLENOID LOCATIONS AND IDENTIFICATION
Solenoid Covers
AUTOMATIC TRANSMISSION SERVICE GROUP
These covers are not available seperately for retro-
fitting. When a new conductor plate is purchased,
covers should accompany the conductor plate.
The location of the "Float", that is used for oil level
control is also shown in Figure 10.
3
4
2
1 0
4
0
1 . 4 0
5 0
9 9 8 6
.
4 Shift Pressure Control Solenoid.
5 1-2/4-5 Shift Solenoid.
6 3-4 Shift Solenoid.
Figure 10
Continued on Page 13
5
6
"Float" Location For
Oil Level Control
Copyright © 2009 ATSG