Transferring A Call - Radio Shack 43-5862 Owner's Manual

Beyond the Basics
2. To hang up,
HANDSET:
BASE:
The other party will still be connected to the call.
Transferring a Call
You can transfer a call from one station to another.
1. During a call,
HANDSET:
BASE:
2. Use
call to. Then:
HANDSET:
BASE:
The call will automatically be placed on hold, and a paging
tone sounds. If you select ALL, all other registered handsets
and base will be paged.
To cancel the transfer, press following key on the initiating
station:
HANDSET:
BASE:
3. When another station accepts the transferred call, your call
will be disconnected.
If you want to rejoin the call, press following key again:
HANDSET:
BASE:
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone
and shows the ID of the station that is paging.
1. To accept the call transfer:
HANDSET:
Press or return the handset to the cradle.
Press END/PAGE.
Press INTCM/HOLD.
Press BACK/HOLD/INTERCOM.
or to select the station you want to transfer the
Press the OK soft key.
Press MENU/SELECT or the SELECT soft key.
Press /FLASH or
Press /FLASH.
Press /FLASH or
Press /FLASH.
Press /FLASH, INTCM/HOLD, or the ANSWER
soft key. If Auto Talk is on, the handset will
answer when you pick up the handset from the
cradle. If Any Key Answer is on, you can also
press a number key, */TONE, or #.
SPEAKER.
SPEAKER.
0