DitoGear Trinity Quick Start Manual page 13

TRINITY
12. SAFETY RULES
1. Prepare a obstacle free working area
at least 1.75m diameter "safe work area" with any objects and a 6x6m "no entry" area during the operation
2. Always disconnect the power source via Control Panel when you are in safe work area
3. Double check all the screws and loose elements.
4. Be aware that the Rotating Arm is rotating at extreme speeds
and needs a few seconds to stop.
5. Always use safety cables to secure possible elements that can
detach during movement of the Rotating Arm.
6. Ditogear is not liable if and to the extent that
the damage resulted from the misuse of the Ditogear Trinity.
Quick Start Guide
600cm
13